It’s a public holiday – Worker’s Day and those of us who work are restless to get some air between us and the ground. There is some discussion in the club WhatsApp group about a suitable location for breakfast – some guys want to go to Thabazimbi for the NGK Meifees (May fest) but many of us are a little twitchy about flying to a town airfield and leaving our aircraft there, being transported to the festival ground and having to rely on folk to bring us back to the planes again.Continue reading “Breakfast in Villiers”
I have been looking for an opportunity to take some family members flying in ZU-IBM. There is a heck of a lot going on at the moment with year end functions, prize-givings, concerts and the like and there simply isn’t a lot of time. When the Springs airport fly-in came up though we decided to make a morning of it. Some family members preferred their beds to an early flight so it was only myself and my son braving the trip to the East Rand.
I tend to overthink trips to unfamiliar airspace. I’ve only been east of OR Tambo Johannesburg International Airport (FAOR) once and that was a long way wide of the airspace doing my night Nav exercise – this route would call for a very close skirting of the airspace around this large international airport.
Undaunted though we planned to route from Tedderfield to Springs via Suikerbosrand Nature reserve (incidentally I have not been there since I was about 12y old) – I thought it would give me a chance to do some radial intercepts onto the HGV VOR using the “virtual VOR” feature on my MGL iEFIS – it creates radials based on the GPS position, so one can navigate using VORs without having a Nav radio per se (this will have to be fixed if I’m ever going to use this aircraft for IFR though)
Saturday morning’s weather was fairly typical for a Saturday morning at this time of year – beautiful at 04h45, and overcast by 06h30. Fortunately the stuff was thin, was clearing from the east (good news since this was the direction of flight) and it looked like a good day to commit aviation.
|24 November 2018||ZU-IBM|
|FATA – |
I try to involve my kids in the preflight process as I think that the more eyes there are scanning the aircraft, the greater the chance of picking up something – but we both had to stop and gawk as a flight of 4 motor gliders taxied past and departed to Springs – they’re quite elegant and looked like they had some pretty impressive initial climb performance.
Then it was time to set sail – in the video below one can see the smile on my son’s face as we accelerated down Runway 29. The routing was easier than I imagined it would be – and much quicker too – by road Springs is a good 90min drive – took us about 24min all told. Being total newbies to the fly-in scene we were impressed by the number of aircraft joining the pattern from all directions – generally professional piloting meant that we were able to build some good situational awareness and no surprises appeared (apart from the unexpectedly strong crosswind on the downwind leg)!
There is a bit of pressure landing at a busy field when you know everyone is watching your landing – fortunately we didn’t need a broom to taxi the aircraft off the runway so we retained some credibility. Which I lost for us by asking where we could park…. “Um… in any open spot?” So we pulled up next to a very pretty RV8 (ZU-RVA) and shut down.
Then it was time to wander around and have a look at the aircraft – there was a good representation of general aviation in SA – everything from a Trike to a Cherokee 140, to C210 on the type certified side and lots of Vans Aircraft (Mostly RV7A’s with a spattering of RV-6/a’s and two RV-10’s – not to forget the aforementioned RV-8), A couple of Slings, Jabirus and some Kitfox aircraft on the NTCA side. A Robbie R44 and an Alo II kept the motor gliders company too.
Sadly we were not taking part in the navigation rally and we didn’t have time to stay and watch the departing traffic so it was back to Tedderfield for us.
|24 November 2018||ZU-IBM |
|FASI – FASY |
We wanted to stay well clear of the busy corridor between springs and Rand Airport so I decided to head south until passing over Heidelberg airport and then route for Baragwanath (FASY) airport – which is to be the new home of ZU-IBM for a touch and go before returning to Tedderfield.
As we were doing run ups at the hold for RWY 03 at Springs there was some commotion on the airport frequency – apparently one of the motor gliders based at Springs had had an engine problem on departure from the grass runway and had completed a safe off field landing – I guess this is bread-and-butter stuff for glider pilots?
We had an uneventful trip back to Tedderfield- did one (average) touch and go at BaraG and then perhaps my best landing to date in the Sling at Tedderfield. I discovered an unexpected advantage of having my son with me – he could hop out and open the hangar, avoiding a shut down and hot start ! – Kids have their uses sometimes…
We’ll be looking for more fly-ins to attend in future.
All good things must come to an end and this includes congresses – well, OK, being at a congress (even one dedicated to anaesthetising small people) is not as good as not being at a congress when in Cape Town, but it was still worthwhile.
There was a huge amount going on from a social point of view but was able to have dinner with an old friend and her family and also to have the most expensive cocktails I have ever drunk – I know it’s Cape Town but R130 for a Mojito is somewhat excessive – it is one of the trendiest spots in town though and the views and architecture made up for the cost of the drinks (almost!)
I’d deliberately left an extra day to get back – my plan was, if the weather looked at all dubious on the Monday, I’d aim to fly halfway back on Sunday afternoon, use the night rating to land late in Bloemfontein and sleep over and hop home on the Monday. My weather guy seemed confident that weather would be excellent on the Monday – with the proviso I left early ( 0600 local). This seemed to me like an excellent plan – despite the logistical problems of accessing the airfield at that time (beyond the scope of this piece).
I was surprised to wake up to a thin layer of cloud, which got thicker as I descended down from Rondebosch to the peninsula and headed north to Morningstar. The logistical issues of accessing the airfield at 06h00 were left by the wayside as conditions were low IMC with 1000m visibility but, annoyingly the clouds would break up every few minutes to reveal that the layer was temptingly thin. I could feel the get-home-itis starting to build. It would be very easy to blast through a hole in the clouds, but what if I needed to return? I doubted I’d be able to find the field again, so in consultation with the weather briefer we decided to wait 2hours. This allowed ample time for a very thorough preflight, at least 2 pre departure visits to the bathroom and sorting out returning the hired car to the AMO/FBO.
At 8h30 there was much more blue sky than low cloud and I decided the time was now. I taxied out, did my run up and launched off of 02. Climbing through 300ft the EGTs all climbed rapidly through 1100deg – well into the red. It took me about 3 seconds to decide that I was not continuing with this – reported returning to the circuit and got IBM onto the ground as soon and as safely as I could – I will confess that my circuit was not textbook but I was keeping it tight in case the engine quit. Bizarrely the power output felt ok and there was no roughness at all.
I had the AMO check it out – they ground ran it, and then we test flew the plane again – we were unable to replicate the problem. A possible theory was carburettor icing (there is no carb heat on the Sling and conditions were favourable for development of carb ice) but there was no discernible power loss so I’m sceptical of that. Another theory is that I didn’t put the mags completely back to BOTH but again, I don’t believe this and once again no issue with power. So I’m at a loss as to what happened, but there have been no abnormal indications since then.
|Date of Flight||Aircraft||Route||Distance (nm)||Time(hrs)||Total(hrs)|
|12 November 2018||ZU-IBM (SLG4)||Morningstar to FATA(Tedderfield)||660||5.9||113.0|
The nett result of all of this is that it was 10h15 local when I departed, a good 4 hours later than I had wanted. I was hoping for a smoother ride than coming down but was to be disappointed. Initially the air was fantastic and I was settling in for an easy trip but as I approached Sutherland the thermal activity started with a vengeance, as it had on the trip down. I climbed to FL95, where the density altitude was 12750ft – I didn’t believe I could justify a climb to FL115 without supplemental oxygen, so I was properly stuck.
It may be something I need to get used to and there may well be a technique to riding the thermals to get maximum efficiency. I think it may be easier in an aircraft that cruises below Va – the Sling will easily cruise in the yellow band – I was having episodes where I was 5-7.5deg nose down, climbing at 700fpm and rapidly approaching Vne, so I would pull throttle to idle, ride out the thermal and then try to time reapplication of throttle to not end up on the back side of the power curve – occasionally I needed to put the prop into climb and once had to put the throttle though the ‘gate’ to 115% power to not sink. This suggested to me that I was not only contending with updrafts but downdrafts as well.
This continued for the rest of the trip – to say it was tiring is an understatement. I was again fortunate to be cleared through the Kimberly (FAKM) TMA which cut about 30miles off the trip. Most worryingly for me and the primary reason why I chose not to stop and take a break was the possibility of thunderstorm development. I was overhead Kimberley at about 13h45 local and had planned to already be in my car driving home from the airport by that stage.
Looking at the radar download I could see that there were some cells starting up so I elected to continue. Approaching Potchefstroom there were definitely cells but they were isolated so was able to manoeuvre my way around them – it is so tempting to fly underneath them but there was a lot of Virga about and I know well that that implies severe downdrafts – best avoided. So we picked our way through the cells. Typically I was unable to raise any cell signal to download the current radar pictures – man I wish we had a decent ADS-B in solution provided here. ATC was fairly noncommittal, “yes there are some buildups but they don’t look too hectic” – easy to say sitting in a comfortable chair.
Finally I was able to call overhead Tedderfield – had a bit of a fiddly landing as the gusts were starting up prior to a storm arriving but safely down and then the big job of unloading the aircraft.
5.9hours in a single leg is a long flight – it would have been better with less turbulence. I learned some important lessons though – leave as early as possible if possible, and rather leave a day earlier if there is any doubt about the weather. If I was to do this trip again (I’m sure I will), I will land at Cape Town international (FACT), suck up the higher landing fees and then be able to (a) access the aircraft whenever needed and (b) be able to depart before sunrise (Morningstar has no airfield lighting).
For a first long cross country trip I think it went really well. It had moments of frustration and times when I was quite anxious about the effects of the turbulence on continued flight. But that feeling when your destination comes into view after a long trip and you know you’ve made it? It’s fantastic.
Some of the best video I’ve seen on YouTube of flying is in the evening – after the sun has set. Being able to fly at night obviously extends the useful flying day and also improves the options for waiting out weather and other potential delays. I’m a firm believer in having options to decrease the risk of acute get-there-itis.
With this in mind I’m setting off on my first post-PPL rating – the night rating. Interestingly we have the night rating as a separate rating instead of built into the PPL like it is in the United States. The requirements are not onerous but definitely stipulate dedicated experience in the dark – at least 3 circuits at night (I’ll be doing many more), 10 hours of instrument training (5 of which can be in the sim), a 150nm cross country by night and a theoretical exam.
As it stands currently, I’ve done 7 odd hours in the sim – all hard IFR flying and have enjoyed it quite a lot – I’m sure it’s the wasted youth playing Microsoft Flight simulator but at least I have some theoretical knowledge to hang onto that experience. So it’s actual night time flying I need – and this is what I did last night…
|Date of Flight||Aircraft||Route||IF Actual||Time(hrs)||Total(hrs)|
|19 July 2018||ZS-ZIP (SR20)||FALA(Lanseria, Johannesburg) - FALA||1.3||1.6||83.6|
So. Flying at night. It’s… well…. dark. In fact this surprised me because I was anticipating that the lights on the plane would be better than they are. They’re not great for taxiing on the apron so that took a little getting used to. The lighting on the taxiways at Lanseria is great so that wasn’t an issue. No delays fro other aircraft on the field while taxiing which is always a plus. Run up and pre departure checks were as per normal, although I chuckled at my instructor when she said that we’d aim for the darkest patch off the end of the runway if we lost and engine, we’d turn on the landing light, and if we didn’t like what we saw we’d turn it off again. This did bring home the stark reality of night flying – it’s really difficult to find a safe landing spot should the big fan in front decide to stop. Lining up on 07 you get the sense of how dark it is – a row of lights leading out into almost infinity and just blackness beyond – not a sliver of moon in sight even.
Performance in ZS-ZIP was pleasantly surprising – 9 celsius outside temp will do that and climb out was brisk (for an SR20). The instructor had me on the gauges almost immediately after takeoff and I flew the numbers – 5deg nose up with 50% flaps at full power gave me just over 85kts (Vy) so we were at CAPS height crossing the 25 threshold which was reassuring. Then it was head down in the cockpit. The aim of the flight was instrument navigation introduction – I’ve done lots of sim time but this felt somewhat easier I thought. We did a number of VOR radial intercepts under the Lanseria TMA – I must say that the VOR intercepts are reasonably easy with it being a command instrument – fly to the needle and the only tricky bit is remembering which reciprocal to use (FROM top TO bottom). Then we climbed out into the practice area for some upper air work – clean and configured stalls (no problem) and some steep turns – again not an issue which is quite funny considering how much difficulty I had with them prior to my PPL practical test.
Then some timed turns which are challenging – essentially we work out an angle of bank for the rate one turn (TAS divided by 10 plus 6-7kts) which at 130kts TAS works out to be around 20deg. Then set up on a radial, bank in to the rate one bank angle, start the timer and then try and maintain 45deg of heading change every 15seconds – 3 deg per second. Not quite as easy as it sounds but very rewarding to get right. These will be useful later in IF training when it comes to holding patterns and procedure turns. Then it was time for some ADF work. ADF navigation puzzles me from a number of aspects. Firstly, it’s a big drain on my brain to figure out which way to turn each time and secondly, they’re essentially obsolete. They’re so obsolete, in fact that our 2004 model SR20 G2 has no ADF radio on board. As a result, we have to bodge an ADF navigation exercise by using the bearing needle on the HSI to point to a GPS location and then fly using that as an ADF station. It gets the job done and perhaps it’s ADF as ADF should have been.
Still, ADF intercepts are fiddly. Intellectually I know it’s a simple case of remembering where one is in relation to the station and turning appropriately. The little tricks – turning away from the desired QDM inbound and towards and beyond QDR for the outbound – do help, but they’re not intuitive – I’m guessing that practice practice practice will be the key to successful ADF navigation. Finishing up with some unusual attitude recovery (again, fun…) I considered we’d done some good work. So what is it like flying at night? I found it really serene – its you and the plane – I didn’t hear any nighttime rough running and the air was smooth (and freezing – note to self – take a better jersey next time) and calm. The lights stretch for miles and the dark patches do feel like they’re reaching up to grab you – I assumed all the dark patches are mountains because why would anyone put lights on a mountain? The best part for me is that the feeling is getting better – i.e I’m flying more by the seat of my pants than I have been before and it feels smoother – I do need to be a little bit less aggressive on my turns – I do tend to roll quite positively which works during the day but perhaps not as well under instrument conditions!
We decided we were chilled enough and headed back for Lanseria. One scheduled 737 on long final and then we were to roll in onto approach. The night time approach is easier, and harder than I thought. Flying the profile is easier than during the day as less gusts and updrafts but the roundout and landing was very different. The instructor was following me on the controls – we went over the threshold at what I felt was the right height having had 2 red and 2 white on the PAPI the whole way down. Then she says “do you feel like you’re sitting on the runway?” and I say, “Um… yes?” and she says, “OK, go to idle” and we touch down light as a feather – best landing ever I think. Which would be awesome, except in my mind we were about 5feet higher and I wasn’t expecting the touchdown at that point. This confused me a little as I was convinced that one would feel lower coming in at night. There is no centreline marking on the runway so the only visual reference is the side lighting – guess I need to pay more attention to that in the coming flights – which should be two sessions of night circuits. Can’t wait.