Date:- 11 August 2017
Aircraft: – ZS-CCT
Route: – FALA –– FALA
METAR: –METARMETAR FALA 111300Z VRB06KT CAVOK 23/M00 Q1027 NOSIG
Total Hours:- 11.3
Having got my stall/spin sign out last week it was time to get my circuit on. I was really looking forward to the new challenge and spent a lot of the week reading up on circuit technique. Unfortunately I also stumbled upon this Accident report which came up as the first link when I searched for SR20 circuit technique. It struck a little close to home – same aircraft type, same flight school and same airport as I’m using – it’s worth a read purely for the point of view of awareness and how things can go horribly wrong for even experienced aviators.
Here are my notes and plan for the circuit at FALA for the 07 right hand (yes, usually they should be left hand but FALA’s is right hand for 07 and left hand for 25) traffic pattern.
It looks like a lot of work – and it is. After a thorough briefing it was off to preflight the plane for this trip – which was the very lovely ZS-CCT – a relatively new Gen 3 Garmin Perspective equipped SR20. My previous flights have all been on the G2 Avidyne workhorses so this was a pleasant change – don’t get me wrong I really have a soft spot for the G2’s especially ZS-BOR. To all intents and purposes they are the same plane but the G3 stands a little taller, goes a little quicker and is a lot more slippery (wheel spats and some more streamlining), doesn’t have a rudder-aileron linkage (the G2 has a small amount of rudder movement with aileron input – just a little) and of course the fancy avionics. But to sit in the plane it feels very much the same and after the first turn in the taxi it felt completely normal. The best part is the Air-conditioning so you can actually do run-ups with the doors closed!
The A4 taxiway is still closed at FALA so short field departure for us again – which was somewhat pedestrian given the ISA+19 conditions – giving us a density altitude of 5900 feet. First circuit was for the instructor to fly to show me the ropes – well, that worked out fine until downwind when we got asked to orbit, and then orbit again, and again and then once more just for good luck – by this stage I was flying (hey, it’s always good to practice level turns!). Eventually we end up back on downwind, fly the base and then had to go around because the departing plane aborted takeoff…. There’s no bad experience.. (but you know it’s busy in the circuit when ATC apologizes for messing you around.
And so we went on – upwind, crosswind, downwind, base and finals – 7 circuits in all. Good fun. But hard work. It seems like only a few seconds from the after takeoff BUPMFF checks to the downwind BUMPFF checks, calling downwind, calling base and then the approaches – which if I say so myself were going really well.
Unfortunately it all tends to go a little pear shaped on roundout – I keep rounding out a little high and then coming down hard through ground effect. The instructor flew one of the landings and oh man, I was in awe of how smoothly she put the plane in ground effect and we just floated gently down. However, with 6-7 landings per hour in the circuit I suspect mine will improve in time.
More circuits next week. More Air-law studying this week – I’m told I must pass air law before I’ll be allowed to solo – I’m not ready to solo yet but give it a couple of hours and I will be….
The air law looks intimidating. But in practice it is pretty straightforward stuff – all relevant and interesting. The difficult part I suspect is going to remember all the validity times of the various documents, Medicals, licenses and so on – my feeling is that this is the sort of stuff that is a setter of multiple choice papers dream material… Ah well…